AquaSure AS-HS32D, Руководство пользователя

Страница: 7 / 32

5
AQUASURE HARMONY SERIES
IMPORTANT! Locate and test the main water supply valve to the home before installing
the system. If the main water supply valve fails to shut off the water completely during the
test, we recommend contacting your local plumber to fix the valve before begin installing the
system.
WARNING! If the system is installed on a metal (Conductive) plumbing system, i.e.. copper
or galvanized metal, the plastic components of the system will interrupt the continuity of the
plumbing system. As a result, any arrant electricity from improperly grounded appliances
downstream or potential galvanic activity in the plumbing system can no longer ground
through contiguous metal plumbing. Some homes may have been built in accordance with
building codes, which actually encouraged the grounding of electrical appliances through
plumbing. A grounded “jumper wire” bridging the equipment and reestablishing the
contiguous conductive nature of the plumbing system must be installed prior to your system
use.
INSTALLING THE SYSTEM
STEP 1. Shutting off the Main Water Supply Valve
WARNING!
If the hot water tank is electric, turn off the power to the hot water tank first to
avoid damage to the element in the tank. If the source water is coming from a private well.
Power off the well water pump and then shut off the main water supply valve.
1. Locate the main water supply valve of the house and turn off completely by turning the
shut-off handle clockwise.
2. Test to see if the water is completely shut off by turning on the closest faucet in the cold
water position. If the cold water cannot be shut off, please contact your local plumber to
fix the valve before begin installing the system.
1. Attached the Yoke to the
provided Bypass valve by
reattaching the metal plate
to the backside of the male
end of the bypass valve. (Skip
this step if the Yoke is already
pre-installed. )
STEP 2. Installing Bypass Valve onto the control head