26
Pipeline Pump Instructions -
AquaStar Pool Products
Prime settings not fast
or long enough
See "Pump Priming Set Up" for instructions on customizing prime
settings. Adjust prime settings to the maximum 3400 RPM for 10
minutes.
Pump strainer basket
is clogged
With pump off, remove the strainer lid and lock ring. Remove the
strainer basket and clean out all debris trapped within. Fill strainer side
of pump housing with water and replace basket, lid, and locking ring.
Pump located above
max. prime height
Measure the height from the pool water surface to the centerline of the
pump. If this height exceeds the maximum prime height listed on the
pump nameplate label consult a qualified repair professional.
Suction side plumbing
clogged
Contact a qualified pool repair professional to inspect plumbing for
blockages.
6.0 TROUBLESHOOTING
CONTINUED
HidroShop.mx
