44
No signal
Please check that all cables are correctly plugged in.
No color shades
Adjust the contrast, the color and the brightness
Stain show on the screen.
May be the result of an electrical signal from car motor, neon
light or
other electrical devices or appliances.
Double or multiple display
image May be the result of an electrical wave disturbance from
another TV,
Computer, Game players or Radio.
Snow on the screen
The cables of the antenna are not correctly plugged in.
The remote control does not
work
Please check the batteries order and alignment. Check that the
IR of the remote control is not hidden by something.
"Zip" made noise on TV
cover
Even if the display image is correct, the noise may come from
an unsteady
fixation of the panel.
No sound
Make sure that you have not pressed the MUTE button on the
T.V or on
the remote control.
No DVD
Make sure the TV Set has been switched to DVD mode
DVD player not working
properly Ensure disc is correctly inserted into the player. Ensure the disc
is not
damaged and with correct format. Please wait patiently
as some discs
need longer time to play.
Problem
Possible cause
Action
No picture, no sound
and the front panel red
LED is not on.
Your Receiver is not plugged into
the mains.
Check mains connection and press
the Standby key on the Remote
Control.
No picture, no sound,
but the front panel red
LED is on.
Your receiver is in standby mode.
Press either <P+> or <P->, Menu or
any number key to bring your receiver
out of standby.
No picture, no sound,
but the front panel
green LED is on.
• You are viewing standard
analogue television.
• The SCART connection to the
TV is faulty or loose.
• Press the <TV/STB> key on the
Remote Control.
• Check SCART TV connection.
The remote Control
does not operate.
• A timer is running, the receiver is
locked (all the
remote control
keys are inactive), the front panel
LED is blinking.
• Press the <timer> key and the <0>
key successively to cancel the timer
and unlock the receiver.
• The Remote Control batteries
have been inserted incorrectly or
are dead.
• Check the batteries and replace if
necessary.
• You are not aiming you Remote
Control at the receiver.
• Make sure you aim the Remote
Control at the receiver and not at TV
You cannot find all the
channels you think
should be available.
The signal to your aerial may be
weak.
Try retuning your receiver (see §6.4).