Installing a Ceramic Bubbler
1) The Small AquaBasin
™
is designed with one removable grate for easy pump access.
Connect the Ceramic Bubbler Plumbing Assembly, as shown in the Figure 11 (Item
#98202 sold separately) and place the pump and plumbing inside the AquaBasin
™
.
2) Place the ceramic bubbler on the AquaBasin
™
. Attach the plumbing from the pump to the
bottom of the ceramic bubbler.
(Fig. 12)
3) Insert PVC stand pipe into MPT x Slip.
(Fig. 13)
The stand pipe prevents water from
completely draining the bubbler and will assist in creating the rippling effect at the top
of the bubbler.
Note: You can trim the stand pipe to fit different size ceramic bubbling
urns and/or to adjust desired effect.
4) Now that everything is in place, you can now finish covering the top of the AquaBasin
™
with gravel.
Fig. 12
How to Assemble the
AquaBasin
™
Ceramic Bubbler
Plumbing Assembly
PVC Extension
Tube
MPT x Slip
Fitting
Bulkhead
MPT x Barb
Fitting
Tubing
90° Barbed
Elbow
Fig. 11
Fig. 13
