AQUASCAN INTERNATIONAL CSE Series, Руководство пользователя

Страница: 7 / 20

Error messages:
x may be 1 , 2 , 3 or 4 . The counting is stopped for this channel. Clean all
surfaces between the light- source and sensor in the referred Registration
Unit. Then press the corresponding C x key.
Page 7 of 20
x may be 1 , 2 , 3 or 4 . This is a warning, the counting is not stopped. Make
sure that the view of the lenses are not exposed to sunlight.
Then press the corresponding C x key.
x may be 1 , 2 , 3 or 4 . The Calibration was not correctly performed. A press
on the belonging channel button will view the number calculated.
Stop counting ( N/S key). Restart and do a new calibration for this channel.
x may be 1 , 2 , 3 or 4 , yyy is number. The calibration was not performed
correct, but the error was accepted. Press Stop
(0/Stop)
and make a new
calibration for this channel.
Power disappeared during previous counting (not stopped with the 0/Stop
key). Press
Enter to restart. When screen shows WEIGHT(g) C x ,
press Enter to resume counting.
x may be 1 , 2 , 3 or 4 . This is a warning, counting is not stopped. The speed
calculations in the Registration Unit are having a problem.
This may be caused by too much water in a dry-counter, too much air in a
fullwater- counter, or dirt on the transparent pipe.
x may be 1 , 2 , 3 or 4 . This is a warning, counting is not stopped. The lens at
the out -side is seeing dirt.
x may be 1 , 2 , 3 or 4 . This is a warning, counting is not stopped. The
Control Unit receives incorrect data from the Registration Unit. This may be
caused by a faulty Unit (Registration Unit, Control Unit or cable), or
disturbance from external equipment.
x may be 1 , 2 , 3 or 4 . The Control Unit does no longer receive data from the
Registration Unit.
x may be 1 , 2 , 3 or 4 , yyy is number. The Control Unit does no longer receive
data from the Registration Unit, and the error was accepted.
RUB WINDOW C x
SUNLIGHT C x
CAL FAIL C x
Cx: yyy Cerr
POWER LOST!
NO SPEED Cx
LENS PROBLEM Cx
REG.KOM ERR Cx
LOST Cx
Cx: yyy LOST
OVERRUN Cx
x may be 1 , 2 , 3 or 4 . The counting is stopped for C x . The counting data
could not be processed fast enough and data has been lost.