www.aquasafecanada.com | Maximus II + Remineralization Installation Instructions 09/13 | page 9
8.0 Installing the D.I. Resin Filter
Push two canister clips (found in the Large Parts Bag) onto the R.O. Membrane housing with the wid-
est end of the clips down (Fig. 14). Attach the D.I. Canister to the canister clips by pushing the canister
down onto the clips. Ensure the blue end caps of the D.I. Resin Canister are screwed on tightly before
doing this. The arrow on the D.I. Canister depicts the direction of flow of water through the canister.
Screw in an elbow adaptor to both ends of the D.I. Canister (Fig. 15). Remember to use teflon tape
(4 to 7 wraps) on the threads of the adaptors throughout the installation as a preventative
measure against potential leaks.
Next, take the short blue hose connected to the “OUT” side of the 4 way Auto Shut-Off Valve (ASV) and
push it into the elbow adaptor on the left side of the D.I. Canister.
9.0 Installing the Remineralizatin Cartridge
Push two more canister clips (found in the Large Parts Bag) onto the R.O. Membrane housing in prepa-
ration for the Remineralization Cartridge (Fig 16). You can rotate the D.I. Canister back out of the way
to make room. Remove the white plugs on either end of the Remineralization Cartridge.
www.aquasafecanada.com
www.aquasafecanada.com
Push 2 canister clips onto
the R.O. Membrane housing
Push the D.I Canister down onto the canister clips.
Ensure the blue end caps of the D.I Resin Canister
are screwed on tightly before doing this.
1
2
Figure 14
Attaching the
D.I. Resin
Canister
Figure 15
Connecting the
blue water line
(Permeate) into
the D.I. Resin
Canister
1
2
Insert elbows into the holes on
either end of the D.I. Canister
Connect the short blue Permeate water line coming
out of the ASV to the elbow adaptor on the left side
(as viewed from the front) of the D.I. Canister
www.aquasafecanada.com
4 way auto
shut-off valve
(ASV)
NOTE:
Back View -
hanging
bracket
not shown
for clarity
