Aquarium Guardian Monitor and Controller, Руководство пользователя

Страница: 9 / 28

6
2.3 Installing the Water Temperature Sensor
The temperature sensor is designed to be mounted directly to the side of
the water sensor. There are two slots in the board. Feed the provided zip
ties though each of the holes in the sensor. Next tighten the zip ties onto
the temperature sensor and trim the excess tie material.
2.4 Installing the Water Level Sensor
The water level sensor is used to monitor and has the ability to control the
water level of an aquarium. This sensor gives an approximation of water
level after the user has entered information regarding their aquarium
through the “Device Detail” page on the website. The water level in the
aquarium can be monitored real-time through the Aquarium Guardian
website, which allows the user to monitor their water level while away
from home. The approximate water level reading can be valuable to keep
an eye on water loss through evaporation, or even a leak. Maintaining the
water level is especially important for saltwater aquariums which need a
stable salinity.
The level sensor must be installed vertically. Follow the “This Side Up” label
on the sensor correctly mount the sensor. The suction cups will provide the
means to adhere the sensor to the aquarium wall. It is important for sensor
wires to be kept away from power cables of aquarium components if
possible. Do not modify the length of the wires for the water level or
temperature sensor.