Preparation Before Installation
1
．
The filter should be placed on a level concrete slab, very firm ground, or equivalent.
Ensure that the ground will not subside, preventing any strain from the attached
plumbing.
2
．
Position the filter under consideration of the piping connections, so that it is
convenient for operating and servicing.
3
．
Ensure that the compliance label is facing the front to allow easy identification in the
case of service difficulties.
How to Install the System
INSTALLATION
1.
Mount the pump to sand filter support by using bolts and nuts.
2.
Install the drain plug assembly to sand tank as below pictures.
3.
Press and turn the sand tank to mount it to sand filter support with correction direction (drain plug is at
outside as below picture).
