7
Locate the hinge and install it with the rounded
loops facing away from the feeder. Use the
5/32” x 15/32” Bolts and 5/32” Washers. Place
the bolt head on top and the thread portion toward
the bottom on the inside of the hopper. Install the
5/32” Nylon Lock Nuts and tighten securely
(Illustration C).
8
Place the lid on top of the hopper unit and
align the hinge knuckles on the lid between
the knuckles on the metal hinge. When properly
aligned, you can see all the way through the
combined holes. Locate the hinge pole and slide
horizontally through the holes (Illustration D). Once
all the way through, locate the cotter pin and install
it in the hole at the end of the hinge pole and bend
it to secure it in position. The lid is now installed
(Illustration e).
PAge 5
(Illustration C)
(Illustration D)
(Illustration e)
