Aquaport AQP-20SIL, Инструкция по установке и эксплуатации

Страница: 12 / 16

10 INSTALLATION AND OPERATING INSTRUCTIONS
F. TROUBLE SHOOTING
BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST.
Problem Possible Causes What To Do
No or limited
water flow
Filtered water chamber not placed properly
on unit.
Press filtered water chamber firmly onto unit to allow
opening of anti spill valve. Ensure not gap is present between
chamber and unit.
No water inside cold water tank.
Ensure water is inside the filtered water chamber, hold cold
tap down for 10 seconds to open non spill valve and allow
water to travel into internal cold water tank and until water
flows out from tap.
Water Level in filtered water chamber
is too low. Rate of flow from tap depends on level of water in filtered
water chamber. Fill unfiltered water chamber with water.
Filtered water chamber is empty. Fill unfiltered water chamber with water.
Internal cold water tank frozen up water.
Turn unit off for 24hrs, after 24hrs check water flow from cold
tap. Turn unit power on. If unit continues to freeze call
1300 764 325
Filter is too old, not allowing water to filter
through and enter filtered water chamber.
Replace filter cartridge.
Leaking from taps
Silicone in tap is not sealing
Properly - or tap cracked.
Call customer care 1300 764 325