Effect
(Playback)
B&W/Sepia/Negative/Mosa
ic/Red/Green/Blue
Date Stamp
On/ Off
Date stamp setting
Quick View
On/ Off
Quick view setting
Vi
deo
Movie Size
720P 1280x720
VGA 640x480
QVGA 320x240
Video resolution setting
White balance
Auto
Automatic white balance
Daylight
White balance selected for
daylight surrounding
Cloudy
White balance selected for cloudy
surrounding
Tungsten
White balance selected for
tungsten lighting
Fluorescent
White balance selected for
fluorescent surrounding
Set
up
Sounds
Off/On
Sounds setting
Frequency
50Hz / 60Hz
Select power frequency in your
location
Power Save
Off / 1Minute / 3 Minutes
Auto power off selection
Language
English/German/Italian/
Portuguese/French/Spanis
h/ Japanese
Display language selection
Date/Time
DD/MM/YY
Date or time setting
Format
Yes/ No
Format the memory location
selection.
Reset All
Yes/ No
Reset all setting
Version
See the firmware version
Note:
The camera will remain the last setting when it is turned off.
5. Using the camera
5.1 Installing the batteries
1.
Open the battery door.
2.
Insert 2 x AAA alkaline batteries into the camera.
3.
Close the battery door.
5.2 Inserting a memory card (not Included)
Follow the instructions given below to insert the optional micro SD memory card into the camera.
1. Turn off the camera first.
2. Open the card bar.
3. Insert the micro SD card into the camera.
Note:
There is only one right direction to insert the micro SD memory card into the slot.
Do not force the card into the slot, or else it may damage both the camera and the
micro SD memory card.
Note:
The micro SD memory card must be formatted before taking photographs.
See the following sections for more information.
5.3 Formatting the micro SD card
1.
Press the menu button ( ) in PHOTO or VIDEO mode.
2.
Select the setup mode by pressing the right button.
3.
Select the format icon by pressing the
W
( ) button and press the SHUTTER button to
confirm.
4.
Press the SHUTTER button to format the SD memory card.
5.4 Setting the resolution
The camera can be set to different resolutions.
1.
Press the menu button ( ) in PHOTO mode, select the resolutions icon by the
W
( )
key and press the SHUTTER to confirm.
Resolutions: VGA (640 x 480), 3M (2048 x 1536),
5M (2592x1944), 10M (3648x2736);
16M (4608x3456)
2.
Five different resolutions will be displayed. Select the desired resolution by using the up or
down button and press the SHUTTER button to confirm the selection.
5.5 Taking photographs
1.
Turn on the camera.
2.
Depending on the distance to the object being photographed, use macro switch to adjust
the distance. Select the flower symbol ( ) if you wish to take a close-up photograph
(11cm –18 cm).
If you wish to take a video or a photograph of surroundings or people (0.5m – infinity), set
the macro switch to normal mode ( ).
3.
If you are not sure if there is enough lighting, turn on the automatic flash( ) by pressing
the flash button. (If the battery power is too low, the flash won’t be activated).
4.
Use the LCD screen to aim at the object you wish to take photographs of.
5.
Press the SHUTTER button and wait until the LCD display turns on again.
Caution
：
1) Taking picture for fast-moving object is not recommended.
2) Image may be distorted when taking picture in a moving vehicle.
5.6 Zoom in and out
The camera can zoom in up to 4 times.
Zoom in or out by pressing the up or down button, a number will appear on the display, 4.x is the
maximum zoom ratio.
5.7 Self-timer setting
You can use the self-timer function when you take a photograph of yourself or when you take a
photograph without flash of an object. To avoid shaking of the camera a tripod is recommended.
1.
Set the camera to photo mode.
2.
Press the menu button ( ). The menu will appear.
3.
Press the
W
( ) button to select Self Timer and confirm by pressing the SHUTTER
button.
4.
Press the
W
( ) button to select the “On” option
5.
Press the SHUTTER button to confirm. The self-timer function is now ready for use.
6.
Aim at the object you wish to take photos of.
7.
Press the SHUTTER button to take a photograph.
8.
The photo will be taken after the timer reaches the delay time of 10 seconds. The camera
will beep during the delay time.
5.8 Recording video clips
1.
Press the mode button to select the video clip mode (
).
2.
For setting the resolution, Press the menu ( ) button and select Resolution, then press
the SHUTTER button to confirm. Two resolutions will be displayed.
VGA (640 x 480), QVGA ( 320 x 240).
3.
Press the SHUTTER button to start recording videos, press the right button to pause and
press the SHUTTER button again to stop recording. The video clip will now be saved as an
AVI file in the camera memory.
After reaching a max. video recording time of 29 minutes the camera will
automatically stop. It can only be restarted manually.
5.9 Playback photographs
1.
Press the( ) button to get into playback mode.
2.
The last picture or video clip taken will be displayed. Press the
W
(
) to get into the
thumbnail mode. Press the Left /Right /Up /Down button to select the desired picture, and
press the Shutter button to view.
3.
In full screen display, press the
T
(
)
button to zoom in the photo.
4.
To shift the image in zoom-in mode, press the SHUTTER button and then use the
mode/menu/left/right buttons.
5.
Press the menu(
) button in Playback mode, press again and hold the menu button until
the menu options displayed. Select SLIDE SHOW and set up the desired slide show way.
Press the SHUTTER button to confirm. The pictures saved in the micro SD card will be
displayed in sequence automatically. To stop slide show, press the menu button.
6.
Press the menu ( ) button in Playback mode, press again and hold the menu button until
the menu options displayed. Select Photo Effect and press the SHUTTER button. Select
the desired effect by pressing the up/down button and press the shutter button to confirm.
The image will be saved as a separate image.
5.10 Protecting photographs/ videos
You can prevent the photographs/videos in the micro SD card from accidental erasure.
Follow the instructions below to protect photographs/videos.
1.
Press the ( ) button to get into Photo playback mode.
2.
Press the left or right button to select the photograph/video clip to be protected.
3.
Press the menu ( ) button in Playback mode, press it again and hold the menu button
until the menu options displayed. Select Protect and press the SHUTTER button
4.
Select “Protect single” or “All” and press the Shutter button to confirm.
5.11 Resizing photographs
A captured image can be resized to a smaller size and saved as a separate image.
Follow the instructions below to resize photographs.
1.
Press the ( ) button to get into Photo playback mode.
2.
Press the left or right button to select the photograph to be resized.
3.
Press the menu ( ) button in Playback mode, press again and hold the menu button until
the menu options displayed. Select Resize and press the SHUTTER button to select the
new image size.
4.
Select the new size and press the SHUTTER button to conform. The image will be saved
as a separate image.
5.12 Playback video clips
1.
When video clips are displayed, press the up button to start playing the video and press the
up button again to pause the playback.
2. Press the right button to fast forward or press the left button to rewind.
3. Press the mode button to stop and exit .
5.13 Deleting photographs and video clips
You can delete a single photograph / video clip, or delete all the photographs / video clips in the
memory.
Follow the instructions below to delete photographs.
1.
Press the ( ) button to enter the playback mode.
2.
Press the left or right button to select photograph/video clip to be deleted.
3.
Press the menu/delete button
（ ）
and select “Delete This Image(Video)” or “All” .
4.
Press the SHUTTER button to confirm.
5.
Press the menu button to exit.
NOTE:
Select “All” and Press the SHUTTER button to confirm, all the pictures and videos will be
deleted.
Photos that are protected from accidental delete cannot be deleted. To delete photos, set
photos to unprotect mode(Section 5.10), and then follow the file delete procedure.
6. Connecting to a PC
The unit can be connected to the computer as mass storage device and transfer photo/video files
for storage.
7. Specifications
Sensor
10.0 Mega pixel CMOS sensor
Image resolution
16.0 Mega pixels: (4608x3456)
10.0 Mega pixels: (3648x2736)
5.0 Mega pixels: (2592x1944)
3.0 Mega pixels: (2048x1536)
VGA: (640x480)
Lens
F/2.8 f = 8.5mm
Focus range
0.5m. ~ Infinity
Macro mode
11cm – 18cm
Digital zoom
4x
Flash strobe
Built-in ( Auto / force / off )
LCD display
2.4" TFT color display
White balance
Auto / Daylight / Cloudy / Fluorescent / Tungsten
Video mode
720P@30fps, VGA@30fps, QVG@30fps
External memory card
Supports micro SD cards up to 32GB
File format
Picture: JPEG, Video: AVI
Self timer
10 seconds
PC interface
USB 2.0
Power source
2 x AAA alkaline batteries
