Installation manual
OVDC001/
OVJC000
Water-saving flush valve with dual/single push button
Function:
With the single-button flush valve, the amount of water to be flushed depends on the depth and time of pressing the
button. With the dual-button flush valve, the large flush ranges from 6 to 9 litres depending on the amount of water in the tank,
while the small flush ranges from 2 to 3 litres depending on the setting. For all flush valves it is also possible to change the intensity
of the flush by adjusting the size of the holes in the valve body ( ).
Installation:
The installation height of the flush valve can be adjusted within the range of the sliding side arms. At the same time,
the rod arm must be adjusted so that the bottom rubber seal always sits on the bottom of the tank. In the horizontal direction, the
single/dual button is slidable for easier placing in the tank lid. ( ).
General instructions
Operating temperature:
1- 40°C
Maintenance:
Depending on the hardness of the water, it is advisable to periodically remove limescale and other impurities from
the flush valve. The use of the drain valve is recommended only with the use of a filter located at the inlet.
Warranty:
The product is covered by a 2- year warranty.
The warranty does not cover defects caused by limescale.
UBC s.r.o.
Mělnická 87, 250 65 Bořanovice, Pakoměřice, Czech Republic
IČ: 27146987 | DIČ: CZ27146987
Tel.: +420 283 090 760 | Fax: +420 283 090 761
E-mail: [email protected] | Internet: www.aqualine.cz
OVDC001 Dual Flush Valve, chrome
OVJC000 Flush Valve, STOP button, chrome
