Assembly instructions
BV357/357B
Installation procedure:
Flush the plumbing to remove debris before installation. Make sure the water supply is turned off. Ensure
that the water supply is easily accessible for installation.
Insert the gasket into the battery body and connect the nozzle (A) to the battery body (B).
Slide the cover (D) up onto the battery body (C). Unscrew the plate (E) from the battery body (C). According
to the holes on the fixing plate (E), prepare 6 holes with a dowel in the floor.
Screw the fixing plate (E) onto the battery body (C). Connect the flexible hoses to the water supply. Attach
the shower hose and hand shower to the faucet body (B). Check that the water is flowing properly and that
there are no water leaks.
PTFE tape can be used to ensure waterproof joints.
After checking that there are no water leaks, screw the fixing plate (E) to the floor using the supplied
screws.
Put the cover plate (D) back in place to cover the fixing plate (E).
UBC s.r.o.
Mělnická 87, 250 65 Bořanovice, Pakoměřice, Česká republika
IČ: 27146987 | DIČ: CZ27146987
Tel.: +420 283 090 760 | Fax: +420 283 090 761
E-mail: [email protected] | Internet: www.aqualine.cz
