Rain sensor or moisture sensor connection
At the bottom of the timer, there is a connection point for rain sensor or moisture sensor. The sensor
type is NC(normally closed). When it is activated, the switch is off, then timer will skip all auto run watering
programs, until rain is over or soil go dry again. When sensor is activated, timer display will show an umbrella
sign, as picture 29. Manual watering is still ok to use, even sensor is activated.
How to set ECO
ECO means ecological watering mode: to split the watering duration into several smaller watering
durations with pause, while still keep the total watering duration same. Each valve can be set independently for
ECO settings
When dial is at RUN, press ECO button, display will show as picture 30
Press L/R button to shift between left and right valve(as picture 30 and 31)
Press + or – button to complete settings for smaller watering duration(as picture 32 or 34)
Press OK button to confirm above settings and then go to set pause watering time between each smaller
watering durations (as picture 33 or 35)
Press OK button to confirm all settings for ECO
