AquaLabo Secomam STAC2, Руководство пользователя

Страница: 28 / 74

STAC2
- 28 -
6
CONNECTIVITY SETUP
STAC2 analyzer is a modern instrument, able to be connected on Ethernet or WIFI network.
There is no physical screen on the instrument itself, and the human interface is based on an
embedded Web page, user can access thru the network. This Web Page able the customer to
manage the complete configuration, status and results of the STAC2.
6.1 CONNECTION SETUP
6.1.1 WIRE ETHERNET SETTINGS
Wire Ethernet connection allow user to connect the STAC2 in a network or directly on a computer.
During instrument startup, a DHCP negotiation is engaged to setup the STAC2 in the current network.
If the DHCP process succeed, an automatic IP is given by the network DHCP service, otherwise the
default 192.168.200.200 IP address is managed by the STAC2 if the user has not changed it in settings.
6.1.1.1 Direct connection with computer
In the case of direct wire connection to a computer, there is no DHCP service running. Consequently,
the Ethernet network computer port must be configured with the same IP address class than the default
STAC2
IP address : 192.168.200.xxx where “xxx” represent a value from 1 to 255 (except the STAC2
value itself)
STAC2 Ethernet port