-2-
1.0 Overview
The S200 TUr process turbidimeter allows for the measurement of the turbidity of process
water on-line. The infrared S200 TUr was designed to meet the design criteria specified
in ISO 7027 and DIN 27027 for the measurement of the turbidity of a sample. Both
models have long life lamps.
The S200 TUr have ultrasonic cleaning.
A pressure regulator on the incoming line is a standard on all S200 TUr instruments and
will reduce pressures up to 1380kPa (200 PSI) down to (104kPa) 15 PSI.
1.1 Unpacking and Inspection of the Instrument and Accessories
The table below indicates the items in the turbidimeter shipment.
Item
Quantity
S200 TUr Turbidimeter c/w Field Terminal Box & Flow Through Assembly
1
Instruction Manual
1
Desiccant Pack
1
Tubing Kit: 1-shutoff clamp
1-backpressure valve
2-connecting tubing with fittings for flow through assembly
1-drain vent screw (used in pressurized systems)
1
Remove the instrument from the packing carton. Carefully inspect all items to ensure that
no visible damage has occurred during shipment. If the items received do not match the
order, please immediately contact the local distributor or the Supratec Customer Service
department.
1.2 The Display
Figure 1 illustrates all the items that can appear on the display. The upper row of the
display (1) is used for reporting the turbidity levels and to provide user guidance in the
customer setting routine. The lower row of the display (2) is used to communicate error
messages and provide user guidance. The display has two icons (3) that are used to
indicate the use of access code and offset mode. In addition, mode arrows (4) are used to
indicate the current instrument operating mode; AUTO (normal operation), CAL
(calibration) and CONFIG (configuration).
Figure 1
–
Display used in the instrument
.
All items used on the display are shown in this figure
