User Manual : Flottation Test
October 2016
AQUALABO
90 rue du Professeur P. Milliez
94506 Champigny-sur-Marne - FRANCE
Tel.: +33 (0)1.55.09.10.10- Fax : +33 (0)1.55.09.10.39
[email protected] - www.aqualabo.fr
The device allows you to program a speed and a stirring time for the two stages of the coagulation /
Flocculation.
A/ Programming of a coagulation / flocculation cycle
Key 2
Setting the two programs the rotation speed for coagulation blinks
Key 3 & 4
Adjusting the speed & stirring time
Key 2
Save the programming
B/ Starting the program
Key 5 Run / pause / restart the program
Key 3 or 4 if the program is paused, moves to the flocculation step
If the unit is turned off, the last programming is retained in memory.
7. Test procedure
Pour into each cell the desired amount of water to be tested (max 1L). Lower the stirring rods.
Inject the desired quantity of coagulant reagent.
Inject coagulant reagent. Press the 5 key to start the coagulation step.
When the coagulation step is complete, the Flottatest beeps.
Press the 5 key to stop the beep.
Inject the flocculent reagent. Press the 5 key to start the flocculation step.
When the flocculation step is completed, the Flottatest beeps.
Press the 5 key to stop the beep.
Fully and slowly raise the agitators by pulling the handle upwards so as not to break the flocs formed.
Admit 100 to 300 ml of pressurized water into each cell by pressing the buttons to the right of each of
the vases.
Wait for the flocs to fully rise to the surface before removing, using the taps,
A clarified water sample for analysis.
At the end of the tests, connect the supplied hose to the drain hose. Direct the end of the hose to a
(Bucket or sink) and then press the button above the drain connection.
Always maintain an exhaust air outlet to prevent overpressure.
Never exceed 7 bar.
8. Specifications
Power supply 12V AC adapter or cigarette lighter
Dimensions (W x H x D) 750 x 301 x 581 mm
Weight 20 kg
Number of places 3
Capacity for 1 liter beaker
Display Numerical LCD screen
Speed from 10 à 400 rpm
Time to reach maximum speed (400 rpm): 15 sec
Timer from 10 à 3600 sec
LED lighting with scattering screen
