10
How to clean your Bathlift
We recommend that you clean your bathlift on a regular basis.
The bathlift can be cleaned with any normal nonabrasive household cleaners which are used on
your bath.
If your bathlift has covers, we recommend that you wash your bathlift covers in a washing
machine up to a maximum temperature of 60 degrees. We recommend that you wash your cover
mats after every two to three baths if possible to avoid any dirt or residue building up.
Do not tumble dry your covers, hang on a washing line or radiator to dry.
To clean inside the foam of your battery handcontrol simply remove the two screws at the back
of the handcontrol and pull the foam away from the control box. Clean as required and simply
replace your battery handcontrol back inside the foam and insert the screws as previous.
NOTE
: If using emollients, aqueous creams or oils in your bath, please ensure that you thoroughly
rinse/clean away any residue from the base of the bathlift and the suction cups. We also recommend
that you wash your covers more often.
Maintenance / Servicing
"
Medical Devices must be examined at statutory intervals in accordance with Council Directive 93/42/EEC
of 14 June 1993".
The
AquaJoy SAVER
requires minimal maintenance /servicing. Please check that everything
is in good working order at regular intervals (at least once every month). The Bathlift actuator is tested to last
10,000 cycles if used and maintained correctly in the environment for which it has been designed
.
However, in
order to maximise the life of the Bathlift and to ensure optimum reliability, performance and safety, AquaJoy by
Drive recommends that you replace your bathlift handcontrol, actuator and charger in accordance with your
product warranty.
AquaJoy by Drive recommends that your Bathlift is inspected at least once annually by either your
supplier or a suitably qualified person who has attended an approved AquaJoy training course.If
required, AquaJoy by Drive can provide the above inspection with an annual service contract. Please
contact our Customer Services Department for further details (see front page for contact details). There
are no user serviceable parts in the AquaJoy Premier Plus Bathlift and repairs or servicing must only be
carried out by your supplier or
other authorised person who has attended an approved AquaJoy training
course.
How to dispose of your Bathlift
On expiry of service life (10,000 cycles), the bathlift, hand control, charger, accessories and packaging
should be disposed of correctly. Individual parts can be disposed of according to the type of material.
The Aquajoy Saver does not contain dangerous materials.
The battery hand control and the actuator should not be disposed of via household waste. They
should be disposed of by returning to your supplier, the manufacturer or an authorised disposal point.
Environmental Conditions for Use, Storage, and Transport
Use:
An ambient temperature range of 50 F° to 104F° (+10 C° to +40C°).
A relative humidity range of 30% to 75%.
An atmospheric Pressure range of 700hPa to 1060hPa
Storage and Transport:
An ambient temperature range of -31F° to 122F° (-35 C° to 50C°).
A relative humidity range of 10% to 100%.
An atmospheric Pressure range of 300hPa to 1060hPa Less than 30days at 50°C
