Page | 3
1.
Product Description
The AquaGuard fire pump controller has been designed as an easy to install, all in one
solution to control the operation, monitoring and automatic testing of the fire pump in
accordance with BS9251:2021.
Incorporating an informative LCD display, easy to use interface and a 128 event log
making the AquaGuard fire pump controller the most advanced on the market.
Features
Jockey Mode
- Upon pressure loss the pump will operate, if no flow is detected then
pump will shut off after 1 minute. Jockey limit fault will indicate if Jockey starts have
exceeded weekly limit.
Fire Mode
- If pressure loss and flow are detected by either of the two pressure switches
and the flow switch then pump will operate in fire mode until manually shut down.
Test Mode
–
Each Monday at 10am the controller will open the solenoid valve until both
the pressure switches are activated and run the pump checking voltage/current and
power are within set parameters.
Maintenance
- Maintenance interval is pre-set to every 12 Months but can be adjusted
to suit specific interval requirements. Maintenance due indicator will require a physical
flow test to reset.
Event Log
- Event log up to 128 entries can be accessed on the control panel.
Setup Mode
- All settings can be changed if required with the use of an advanced user
password to prevent unauthorised access to settings.
