Fitting the compensation profile
strip
Position the compensation profile strip against the wall and
use a spirit level to check that it is vertical. Mark the positions of
the holes to be drilled in the wall through the holes pre-drilled in
the strip.
Remove the compensation profile strip, drill the holes and insert
the wall plugs. Apply a layer of silicone to the profile strip,
insert the internal section of the strip and secure both to the
wall using the screws.
Postavljanje zidnog profila
Naslonite profil uza zid i libelom provjerite da je
vertikalno postavljen. Označite mjesta za bušenje na
zidu pomoću rupa već izbušenih na profilu.
Odmaknite profil, izbušite rupe u zidu i stavite tiple.
Nanesite sloj silikonskog kita na zadnju stranu
profila, postavite ga na zid i učvrstite vijcima.
FAZA 1
PHASE 1
FAZA 2
PHASE 2
Ø 6mm
10 mm
Brtve
Gasket
Brtve
Gasket
A
B
B