12
ATEX Operating Manual DO50-DO90
AquaDuna GmbH & Co. KG / Ferdinand-von-Steinbeis-Ring 31 / 75447 Sternenfels / Germany
Telephone: +49 (0) 7045 204980 / www.aquaduna.com
Subject to technical modifications.
© Copyright by AquaDuna GmbH & Co. KG (2019) All rights reserved. Contact: www.aquaduna.com
4 Installation and commissioning
4.1 Installation of Ex target jet cleaners
Observance of operating conditions (Point 1.2.3.) is to be ensured.
If the Ex target jet cleaners are mounted by the operator on a support tube
(lance), the interface between the customer support tube and the Ex target jet
cleaner must be fixed with a safety weld seam.
The securing seam must be applied in such a way that an O-ring inserted for sealing is not
damaged.
1. Screw on support tube 2. Weld interface
4.2 Assembly and operating personnel
The operator of the target jet cleaners is obliged to train the assembly and oper-
ating staff. All persons handling rotating and spraying machines must have been
instructed on the hazards connected with these machines.
Persons who are not registered as operating staff should not linger within the operating area
of the machines. The operator must assure the necessary measures.
