Wether you fill the pressure container or use a bottle (a) with the bottle adapter with water you would
like to electrolyse: Before switching the device on, you should have at least 0,1 Liter of drinking water in
the container. Ideally the container is filled to the top, like this greater hydrogen pressure can build up
and more hydrogen is pressed and dissolved into the water. Keep an eye on the sealed screw fitting and
check or replace the rubber seals, if water leaks, before you start using the device.
Attention: Hydrogen
pressure may not be raised by repeating the electrolytic process more than 40 minutes.
The starting mode requires that the device is operational. The display is illuminated
Pressing the action button once means that operating mode 1 starts (b), which takes 3 minutes.
Pressing the action button twice means that operating mode 2 starts (c), which takes 5 minutes.
When starting an
announcement will commence: “Generating Hydrogen water”
and the blue LED
bubbles start to blink. When finished they switch off with the
announcement “Generating completed”
.
After a finalising tone the display is off. You are able to stop the procedure during electrolysis by pressing
the action button. Also then the announcement and the finalising tone will chime.
a
Attention: Only use still water!
No carbonic acid in the water.
b
c
12 Operating mode
H
igh
dr
og
en
®
A
ge
2
G
o
Testing the amount of molecular hydrogen is carried out immediately after production with the
optional H2 Blue
®
Kit.
A water sample of 6 ml is filled carefully into the measuring cup and one drop of the blue measuring
liquid is added. To obtain the same size of drops it is recommended to keep the bottle vertical.
Each
drop that discolours means 0,1 ppm (=100 ppb) dissolved hydrogen gas.
If a drop does not discolour automatically one can stir gently.
If the liquid still does not discolour, then the last drop does not count. Water under normal air pressure
can contain up to 1,6 ppm hydrogen gas (full saturation). From chemicals or with the
HIGHDROGEN
®
AGE
2
GO
Hydrogen Generator you can also produce an
over saturated water with more than 1,6 ppm.
Yet this falls back to full saturation after a few minutes when this water comes into contact with the
normal atmosphere. Whoever wants a lot of hydrogen, has to drink quickly or fill the container to the
brim so that it is gas-tight and bubble free.
Do not drink the test liquid and keep it out of reach of children! Use protective gloves, a surface that
can be wiped clean and watch out for clothing or dishcloths. The drops contain methylene blue, a very
intense dye.
13 Optional accessory: Hydrogen measuring drops
H
ig
hd
rog
en
®
A
ge
2
G
o
