Aquacal TropiCool TC1000, Руководство по эксплуатации

Страница: 12 / 27

Page - 9
1.5.h Operating Chiller (With an External Controller)
Controller with an internal thermostat control
Activating Chiller
1. Set the desired temperature at the external controller.
2. Use the external controller to select either the "Pool" or "Spa" to heat.
Deactivating Chiller
l
Set the external controller to "OFF".
Please note - If equipped, the chiller's cooling function will be disabled when using
this type of controller.
If the cooling function is needed, the chiller must be temporarily reprogrammed for
local control. Check with controller installer if chiller needs to be re-programmed.
Controller with 2 positions - ("Pool" and "Spa" - no internal thermostat control)
Activating Chiller
1. Set the desired temperatures on the chiller thermostats. See "Setting Thermostats" on page 6.
2. Use the external controller to select either the "Pool" or the "Spa" thermostat.
l
Rapid movement between thermostats without a "rest" between each change can cause a missed
signal by the chiller.
Deactivating Chiller
l
Go to the heat pump and set the mode to "OFF". See "Setting Operating Mode" on page 6.
Please note - If equipped, the chiller's cooling function
will be disabled
when using
this type of controller.
If the cooling function is needed, the chiller must be temporarily reprogrammed for
local control. Check with controller installer if chiller needs to be re-programmed.
Controller with 3 positions - ("High", "Low", and "Off" - no internal thermostat control ):
Activating Chiller
1. Set the desired temperatures on the chiller thermostats. See "Setting Thermostats" on page 6.
2. Use the external controller and select the “High” or “Low” thermostat.
l
When changing between thermostats, select "Off" first. Then select desired thermostat.
l
Rapid movement between thermostats without a "rest" between each change can cause a missed
signal by the chiller.
Deactivating Chiller
l
Set the external controller to "OFF".