Aquacal GBB BB500, Руководство по эксплуатации

Страница: 28 / 51

Page - 25
2 - Maintenance
IN THIS SECTION:
2.1 Water Chemistry 25
2.2 Cleaning Equipment 26
2.3 Clearances 27
2.4 Irrigation and Storm Run-Off 28
2.5 Water Flow Rates 28
2.6 Adjusting Water Flow Using ΔT (Delta-T) 29
2.7 Planned Maintenance 30
2.8 Winterizing 31
2.1 Water Chemistry
Check water chemistry regularly and maintain within recommended levels. Standards vary in different
residential and commercial applications. Follow all local applicable codes.
NOTICE
Failure to heed the following may result in damage to equipment.
l
Do not allow water to flow through heat pump when refinishing or acid washing a pool. Either use an installed
bypass to route water away from heat pump or deactivate filter pump.
l
To avoid damage to equipment, monitor and maintain chemistry within recommended levels.
CHEMISTRY LEVEL CHART
(RESIDENTIAL)
CHEMICAL POOLS SPAS
Chlorine 1.0 – 3.0 ppm 3.0 – 5.0 ppm
Bromine 2.0 – 6.0 ppm 2.0 – 6.0 ppm
Cyanuric
Acid
30 – 50 ppm 30 – 50 ppm
pH 7.4 – 7.6 7.4 – 7.6
Total
Alkalinity
80 – 120 ppm 80 – 120 ppm
Calcium
Hardness
200 – 400 ppm 150 – 250 ppm
Total
Dissolved
Solids
*
0 – 1,500 ppm
1,500 ppm above start-up of total
dissolved solids in spas
*
Salt from a chlorine generator is not included in Total Dissolved Solids.
2
-
M
ai
nt
ena
nc
e