Aquacal AutoPilot SP05, Руководство по установке

Страница: 7 / 89

Page - 3
1 - Installation
WARNING
Failure to heed the following may result in injury or death.
l
Installation of this equipment by anyone other than a qualified installer can result in a safety hazard.
l
The information contained throughout the "Installation" section is intended for use by qualified installation
technicians familiar with the swimming Pool/Spa safety standards.
NOTICE
Failure to heed the following may result in damage to equipment.
l
Failure to protect equipment against corrosive conditions will adversely affect the life of the equipment and will
void equipment warranty.
IN THIS SECTION:
1.1 Positioning Equipment 4
1.2 Clearances 4
1.3 Dimensions 6
1.4 Plumbing 7
1.4.a Plumbing Requirements 7
1.4.b Plumbing Diagrams (Water Source) 8
1.4.c Plumbing Diagrams (SunPower) 11
1.4.d Water Connections to Heat Pump 12
1.4.e In-Line Chlorine Feeders 14
1.4.f Water Flow Rates 14
1.4.g Adjusting Water Flow Using ΔT (Delta-T) 15
1.4.h Geothermal Menus 17
1.4.i Maintaining Ability to Winterize 18
1.5 Electrical 19
1.5.a Electrical Requirements 19
1.5.b Incoming Power Access Holes 22
1.5.c Access Panels 23
1.5.d Verifying Transformer Setting 23
1.5.e Three-Phase Adjustment 25
1.5.f Schematic Location 25
1.6 External Equipment 26
1.6.a Connecting a Call Flex 26
1.6.b Connecting a Source Water Relay Switch 29
1.6.c Connecting External Controllers to Heat Pump 29
1.6.d Connecting Gas Backup Heater to Heat Pump 36
1.6.e Connecting Multiple Heat Pumps (Primary / Secondary) 41
1.6.f Connecting a Pool/Spa Switching Relay 47
1.7 Program Heat Pump for the Customer 50
1.7.a Setting Date and Time 50
1.7.b Setting Time and Date Format 51
1.7.c Selecting Celsius or Fahrenheit 55
1.7.d Setting Entry Code Option 56
1.7.e Using Entry Code to Access Heat Pump 58
1.7.f Resetting Factory Defaults 58
1.8 Cleaning Equipment After Installation 60
1
-
Ins
ta
lla
tion