Aqua Simpool Pool-T, Инструкция по эксплуатации

Страница: 49 / 72

Simpool Pool-T Model INSTRUCTION AND MAINTENANCE MANUAL
Programmable digital peristaltic pump
ENGLISH
ADSP7000642 rev. 1.0 13/01/2014 49/72
Timed dosing cycle USER MENU
Fig. 9 - Standard programming from Timed Mode User Menu
3.2.2 QUICK START-UP - Quantity Dosing Cycle Mode
These are the fundamental parameters to be set to activate the pump:
Delay Time - Grams per Cu. M. of Product - Product Density - Block Time
From the User Menu you can proceed quickly with the steps below:

Prime the pump;

Delay time setting;

Setting of the amount of product to use for each cu. m. of water;

Setting the product density;

Block time setting;
Here below are the pump default parameters:

No Repeat Mode;

On-line Change from User Menu values enabled;

Stabilization Time of the Inhibitory Signal: 10 sec.;