Aqua CTO Series, Руководство по установке и эксплуатации

Страница: 7 / 22

CTO-10 & CTO-20 OZONE GENERATOR
2
SECTION2
Installation
2A.Location
2A-1.Location for ozone generator
The CTO-10 and CTO-20 are designed for wall mounting. See figure 1A. Mount generator
in a clean, protected area, either indoors or outdoors. (See location requirements section
1A) Locating generator is distance from corner at least 1m. Allow sufficient access for
maintenance and all tubing and electrical wires. Ozone generator should be installed no
less than 1.5m above the ground.
Figure 1A
This Figure is the CTO-10&20 out side view.
2A-2. Location for oil less air pump
Mount oil less air pump left side of ozone generator. The pump should be installed no less
than 1.5m above the ground.
2B.Mounting
2B-1.Wall Mount for ozone generator
Mount four m8 expansion bolts on the wall as the position as the holes of mounting legs of
ozone generator in the Figure 1A.
2B-2.Wall Mount for oil less air pump
Mount two m8 expansion bolts on the wall as the position as the holes of the pump‟s
bracket in the Figure 1B.