7
STEP 6
•
In order for step to sit properly,
it must be weighted in place
using approximately 50 lbs of
sand. To weight step, place
funnel in opening of side panel
on top step. Pour 25 Lbs. of
sand into each side of the step.
•
Once step is placed in the pool, tip the
step forward and move it left and right to
ensure that air escapes and water enters
the steps and risers. This will help keep
the step stationary in the pool.
Place funnel up
here and pour
sand through
these posts
NOTE
You may need to rock the step back and forth to distribute
the sand so the 25 Lbs. will fit in each side of the step.
STEP 7
•
Place the assembled step INSIDE the pool where you would like to enter the pool.
**When lifting the step into the pool it is recommended that two people lift to avoid
injury. Filter should be turned off to stop water circulation.
NOTE
When installing a step inside of your pool it is recommended to
install a step mat underneath to protect your liner.
This item is sold separately.
