![Aqua Quip EVO2 LED Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/aqua-quip/evo2-led/evo2-led_installation-instructions_2959076004.webp)
E V O 2 L E D L I G H T S F O R C O N C R E T E P O O L S – I N S T A L L A T I O N I N S T R U C T I O N S
EVO2 LED
LIGHTS FOR
CONCRETE POOLS
ELECTRICAL CONNECTION AND
OPERATION
s
Install Light(s) and Transformer(s) in
accordance with AS/NZS 3000:2007 as
amended.
s!QUA1UIPSEXTRALOWVOLTAGE4RANSFORMERS
have either 2 or 4 secondary outputs, each
being 12v 50VA, refer to Diagram 1.
s$IMMINGOF%VO,%$&IXED#OLOUR,IGHTS
(i.e. white, blue and green) is possible.
Aqua-Quip recommends the HPM Leading
Edge Dimmer Cat. 200L. Evo2 Multi-Colour
LED Lights cannot be dimmed.
s)FYOURLIGHTSARE%VO-ULTI#OLOURTHENSEE
included “LED Programming Instructions”.
4
POOL LIGHT INSTALLATION
Pool Light Installation
10 Remove green-coloured Plaster Cap. Clean
any debris that may have entered the
Housing
and
Adjustable Dress Ring during pool
construction. Unwind Evo2
Cable and unscrew
the white
protective Connector Cap and
remove it (retain for possible future use). Ensure
the two O-rings are lubricated and in good order,
clean any grit or dust that may be around the
O-rings. Push the
Quick-Connect Plug Kit
into the rear of the Evo2 Pool Light and tighten
Connector Nut firmly by hand. Insert and coil
up excess cable into the
Housing.
Evo2 self-locates onto
the
Adjustable Dress
Ring, use two 5/8" CSK
stainless steel screws
provided to attach pool
light to
Adjustable
Dress Ring, do not
overtighten.
Automatic Pool Cleaners (Australia) Pty Ltd
40 Percy Street, Auburn NSW 2144
Ph: 02 9643 8338 Fax: 02 9643 8448
www.aquaquip.com.au
COPYRIGHT AUTOMATIC POOL CLEANERS (AUSTRALIA) PTY LTD EIM4p_0911
APL502 and
APL 512 run up to
2 x 50VA lights.
APL504 and
APL514 run up to
4 x 50VA lights.
WARNING
Never stare directly at LED Pool Lights.
Prolonged direct exposure can cause eye damage.
11 Fit optional Polished Stainless Steel
Trim Ring if required, using the 7/8" CSK
stainless steel screws provided in the
Stainless Steel Trim Ring Kit.
12 Only turn pool light on when completely
submerged under water.
The Evo2 LED Pool Light is factory-sealed
and is not user-serviceable.
Diagram 4 – Transformers
Ensure sufficient
cable length is
wound up inside
the Housing.
Connector
Nut
Diagram 3
TRANSFORMERS
Rainbow Pool Products
PO Box 2388, Mansfield Qld 4122
Telephone STD 61-7-3849 5385
Facsimile STD 61-7-3849 5384
Email: [email protected]
Web: www.rainbowpoolproducts.com.au