7h Digital timer
(certain models)
1
2
3
START
7 HOUR TIMER OPERATING INSTRUCTIONS
Your pool cleaner is equipped with a 7 hour digital timer. This timer is
simple to operate and offers two cleaning modes –Timed and Continuous
cleaning. In normal service it will give you years of reliable service.
Switch the Power Supply ON. The LED will flash two horizontal bars until
you select either Continuous or Timed operation.
Continuous Operation:
Press the C-RUN button. Both the green LED
above the button and the red “ON” LED will illuminate. The cleaner will now
clean your pool until you stop it by switching the Power Switch to the “OFF”
position.
Timed Operation (step 1):
Press the “UP” arrow button once for each
hour of operation you desire (up to 7 hours).
Timed Operation (step 2):
When you have selected the proper number of
hours, press the OPT button to set the timer.
Changing Time Setting:
After you have set the cleaning time you may add
or subtract hours by simply pressing the “UP” or “DOWN” arrow button.
This may be done WHILE CLEANER IS OPERATING IN THE POOL.
NOTE: During Timed Operation the cleaner will shut off for 5 seconds
every eight minutes. This is a normal function. No adjustment is required by
the operator.
IMPORTANT – If you shut off the Power Supply this action will cancel
the programming you have entered. To resume cleaning you must
repeat the procedures listed above.
2
3
4
5
1
6
7
8
9
1 - LED Display
2 - Continuous Operation Mode LED
3 - Continuous Operation Mode Button
4 - Timer Operation Mode LED
5 - Timer Operation Mode Button
6 - Timer is in operation LED
7 - Timer is turned OFF LED
8 - Timer selector button (increase value)
9 - Timer selector button (decrease value)
4
5
6
Содержание JetMAX Junior
Страница 1: ...Operating Instructions Commercial Jet Cleaners ...
Страница 7: ......
