Aqua One OakStyle Urban 230, Руководство по сборке, Страница: 19 / 20

Step 31
Step 32
Fit the Drawers
Starting with the bottom
Drawer, slide both the
Runners forward and
locate the Drawer Sides
between them, lining up
their holes with the 2nd
'threaded' holes in the
Runners.
Working from the inside
of the Drawer, insert 2
9mm Screws through the
Drawer Sides and out
into the 2nd threaded
hole in the Runner.
Note: Do not overtighten
the Screws. If they catch
on the Runner you may
need to loosen them
slightly.
2nd threaded
hole
Q
M
The Runners could
have sharp edges and
we recommend that
you position them
using a Screwdriver
O
O
Adjust the Doors if
needed
a:
Height adjustment.
Loosen Screws A on
Hinge Plates and move
Door up or down as
required.
Retighten Screw A.
b:
Forward and Back
adjustment.
Loosen Screw B on
Hinge Plate and move
Door in or out as
required.
Retighten Screw B.
c:
Sideways
adjustment.
To move Door ‘out’
loosen Screw C.
To move Door ‘in’ tighten
Screw C.
a:
b:
c:
A
A
B
C