10
15. Unpack the Heaters and mount them in the
Heater Chamber.
DO NOT PLUG THE HEATERS IN UNTIL THEY
ARE FULLY SUBMERGED IN WATER.
16. Attach the Drain Pipe (13) to the Drain
Bulkhead (7) as shown.
17. Place the return pump into the return pump
chamber.
18. Join the two sections of return pipe by
reassembling the Return Hose Barrel Union (10)
19. Unpack the Protein Skimmer and follow
the included instructions to set it up. Mount
the skimmer as shown on Page 7. To make it
easier to position the skimmer body remove the
collection cup first.
20. Fill the aquarium with water so that the
water overflows into the sump and fills the
Return Pump chamber to about 5cm above the
maximum operating water level mark. When
running, the water level should always remain
above the minimum operating water level mark.
Setup Instructions
Maximum operating
water level
Minimum operating
water level
