1. Scope of delivery
Electronic Safety Transformer -
Input: 110 – 240 V / 50/60 Hz, Output: 24 V DC
•
Wireless control for EcoDrift current pumps of the x.1 series:
- Two separately or parallel controllable channels for connecting any number of current pumps of
the series EcoDrift x.1.
- The Timer feature allows mutual alternating control of the channels in the interval of 1 - 60
minutes.
- Each channel can be individually adjusted for wave simulation, pulse rate and flow intensity.
- It is possible to reduce the flow at night automatically.
- Feed function for deactivating the flow for 10 minutes.
2. Operation
The EcoDrift Wireless Master Controller (Fig. 2) can only be used combined with the
EcoDrift Control 0 - 10 V (Fig. 1).
In case older pumps of the x.0 series are used, the controller
has to be replaced.
Fig. 1: EcoDrift Control 0 - 10 V
1.
Power input
2.
Light sensor connection (at the side)
3.
Pump connection
4.
Control dial
5.
Connection for 0 – 10 volt
Spare parts list
Art.-No.
Pict.-No.
Article
103.601
Pict. 2
EcoDrift x.1 Single Controller
103.501
Light sensor with cable EcoDrift 8.1 - 20.1
Valid for all controllers:
Protect it from condensate and respect a m
aximum of 80% air humidity.
Connect the Wireless Controller Master to the transformer and power supply, it must remain
permanently connected. In case of a power failure, the settings are saved. By briefly pressing the
"A/B LOCK" button, the EcoDrift Control 0 – 10 V is directed to the requested channel A (yellow LED)
or B (blue LED) for the respective EcoDrift pump.
All other settings are suspended then, the pump is only controlled by the EcoDrift Wireless Master
Controller.
Programs of the EcoDrift Wireless Master Controller:
20 - 100:
Speed Mode:
Flow of
20, 40, 60, 80 or 100% power. Only in conjunction with W1
and C.
MODE/NIGHT:
By briefly pressing, the requested pump mode at each active channel is selected.
By pressing a bit longer, the night mode is reached (LED "Night" is lit).
C:
Constant flow.