12
Wet foam:
With freshly prepared sea water, after using water conditioners or at extremely high
loading, excessive wet foam may be produced. This wet foam is forced into the cup, requiring more
frequent emptying than normal. After approx. one day, the aquarium load will be normal and the
skimmer will produce correct foam.
Dry foam:
Not enough foam or too dry a foam could be an indication that the needle wheel is dirty
or the venturi is obstructed. A thorough cleaning is recommended.
5. Cleaning
The foam cup is not fixed on the reaction pipe. For cleaning, it can be removed easily. After
removing the top, the cup can be cleaned with a brush under running water.
From time to time, depending on the waste concentration, the reaction pipe can be cleaned, too.
The air injection of the pump can be clogged with salt or lime. Clean it from time to time with a
wire. On the pressure side of the pump is a movable little tile. It can be cleaned after removing the
hose connection.
6. Warranty
Should any defect in material or workmanship be found within twelve months of the date of
purchase AB Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part
free of charge – always provided the product has been installed correctly, is used for the purpose
that was intended by us, is used in accordance with the operating instructions and is returned to us
carriage paid. The warranty term is not applicable on the all consumable products.
Proof of Purchase is required by presentation of an original invoice or receipt indicating the dealer’s
name, the model number and date of purchase, or a Guarantee Card if appropriate. This warranty
may not apply if any model or production number has been altered, deleted or removed,
unauthorised persons or organisations have executed repairs, modifications or alterations, or
damage is caused by accident, misuse or neglect.
We regret we are unable to accept any liability for any consequential loss.
Please note that the product is not defective under the terms of this warranty where the product,
or any of its component parts, was not originally designed and / or manufactured for the market in
which it is used.
These statements do not affect your statutory rights as a customer.
If your AB Aqua Medic GmbH product does not appear to be working correctly or appears to be
defective please contact your dealer in the first instance.
Before calling your dealer please ensure you have read and understood the operating instructions.
If you have any questions your dealer cannot answer please contact us.
Our policy is one of continual technical improvement and we reserve the right to modify and adjust
the specification of our products without prior notification.
AB AQUA MEDIC GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 01/2010
