5
aquafit 2:
1. Ceiling suspension
7. End of wire
2. Retaining bush for ceiling suspension
8. Locking screw
3. Ferrule
9. Allen key for tightening the locking screw
4. Stainless steel wire
10. Light fixing
5. Lamp fixing
11. Peg
6. Non-return cap
12. Screw
aquafit 3:
Fig. 3: aquafit 3
1. Ceiling suspension
8. Locking screw
2. Retaining bush for ceiling suspension
9. Nut for light fixing
3. Ferrule
10. Light fixing
4. Stainless steel wire
11. Peg
5. Lamp fixing
12. Screw for peg
6. Non-return cap
13. Screw for light fixing
7. End of wire
Mounting:
The ceiling suspension (1) must be securely screwed to the ceiling. Suitable screws and pegs are
provided but you should ensure your ceiling is capable of holding the weight of the light in this
way. Depending on your ceiling, it may be necessary to use special cavity plasterboard fixings or to
screw through into blocks you have fitted behind the ceiling.
The stainless steel wire (4) is now fed through the retaining bush (2) of the ceiling suspension (1)
so that the ferrule (3) is retained inside the ceiling suspension. The retaining bush is screwed onto
the ceiling plate allowing the stainless steel wire to hang free.
