6
LED aquarium lighting for salt and fresh water aquaria
The housing is made of powder-coated and saltwater resistant aluminium.
1. Technical Data
Line voltage:
230 Volt/50 Hz (if not stated otherwise on the ID-label).
-
total lumen 3.558
-
colour temperature 14,000 K
-
11 white LED’s, 7 blue LED’S (total 50 watt)
-
safety tension 24 V with external power pack
Dimensions:
27 x 36.8 x 2.4 cm (l x w x h)
2. Unpacking
On unpacking, please check the lighting system immediately for any damages. In case of any
complaints, please contact your dealer directly.
Included in shipment:
•
aquareefLED
•
steel wire suspension aquafit II
3. Safety advices
•
The lighting system cannot be used as aquarium cover. It has to be mounted only above the
aquarium. The minimum distance between lighting and aquarium must be at least 30 cm.
•
The housing may become hot during operation.
Be cautious when touching it!
•
For cleaning, disconnect the lighting system from the mains and let it cool down. Afterwards,
take the lighting down.
•
When cleaning and during operation, take care that no humidity enters the interior of the
lighting system!
•
Pay attention to a sufficient thermal exchange.
Do not mount the system in enclosures or
behind panels. Missing aeration may result in overheating and damage the electric components.
•
Do not try to repair the lighting system (LED’s, electronic parts). Please send it in for checking,
preferably with a list of defects. Even broken LED’s can only be changed by the manufacturer.
•
When working on the light, always pull all power plugs.
4. Installation
The light can be fixed at the ceiling with the attached steel wire suspension.
Contents:
The suspension system comprises 2 pcs. of each of the following:
1.
Ceiling plate with screws and plugs, 2 metre stainless steel wire with stopper
2.
Light fixing (wire with Y-piece and end bushes)
Mounting:
The two ceiling plugs (1.1) must be securely screwed to the ceiling by using the screws and plugs.
