Aqua Medic aCone 1.5, Руководство по эксплуатации

Страница: 9 / 18

9
Type Outlet
height Total height
(lower edge) Venturi
pump Power
consumption Capacity
aCone 1.5
24.5 cm
53.0 cm Eco Runner
3700 incl. air
wheel
38 Watt
up to 1,500 l
aCone 3.0
25.5 cm
59.5 cm Eco Runner
6000 incl. air
wheel
54 Watt
up to 2,500 l
2. Principle of operation
The skimmer with venturi pump has to be placed in a separate filter tank. The water is pumped to
the skimmer by the venturi pump. The pump draws water from the filter tank and mixes it with air.
Within the pump housing, the bubbles are cut into very fine pieces by the Aqua Medic
air wheel
.
The air/water mixture is pumped back into the skimmer. The treated water flows through the
outlet or drain valve out of the skimmer back into the filter tank.
3. Venturi pump
The Eco Runner series of magnetically coupled centrifugal pumps are very quiet in operation.
They have fully encapsulated synchronous motors. All materials are salt water resistant.
The polished ceramic shaft and bearing is practically wear-resistant, ensuring a long operating life.
An integrated thermal overheat protection device prevents damage to the windings should the
impeller rotation be impeded. The polished ceramic shaft and bearing is practically wear-resistant,
ensuring a long operating life. An integrated thermal overheat protection device prevents damage
to the windings should the impeller rotation be impeded.
The pumps can easily be taken apart for cleaning. The direction of the rotation is controlled
electronically. This enables a very efficient operation.
3.1. Technical data
Type Eco Runner 6000 incl. air
wheel Eco Runner 3700 incl. air
wheel
Voltage:
Power consumption: 230 V~/50 Hz
54 Watt 230 V~/50 Hz
38 Watt
Cable length:
Protection class:
Protection rating: 3 m
I
IP X8 3 m
I
IP X8
Max. depth: 1 m ,
∇
1 m
1 m ,
∇
1 m
Max. water temperature: 35 °C 35 °C
3.2. Connections
Suction side:
The included air injection nozzle is at the pump’s suction side.
Pressure side:
The pressure side can be connected with the skimmer by the existing connection
with union nut (13). Please make sure that the O-ring (7) was placed into the groove.