Aqua Lung FIRST STAGE, Руководство по обслуживанию

Страница: 13 / 35

Service manual First stage Legend
Service Manual 1st stage Legend
Rev. 12/2011
13
d. .Install the dust cap between the yoke and the
shutter crown, then tighten the yoke screw so that
the spring is compressed
e. Using a 3mm hex key screw completely the shutter
valve by turning the key counter clockwise until the
crown begins to turn.
f. Unscrew the yoke screw and connect the assembly
on a cylinder valve equipped with an insert. Tighten
the shutter valve up to 3Nm by turning counter
clockwise. Remove the assembly from the cylinder
valve.
g. Fit a non lubricated O-ring (124703) inside the yoke
retainer and fit the filter (129209) into the O-ring
h. Fit the yoke ACD cap (129607) between the Body
and the yoke (124611 / 129713 / 124610) and
screw the ACD assembly into the body
by holding
the body with the entry downwards
.
Dust cap
against
the crown
i. Using the tool A11001, tighten the yoke retainer up
to 2,5m.Kg.
j. Screw the Yoke screw (129618 / 129721) into the
Yoke