Aqua Lung 397094, Руководство пользователя

Страница: 12 / 36

12
BD BUOYANCY COMPENSATOR USER'S MANUAL
AttAChiNg the Mp hoSe to the FirSt StAge
1. Remove the inflator hose from the power
inflator body by gripping the grooved sleeve
over the quick disconnect coupling with your
thumb and forefinger. Slide the sleeve back.
2. Remove the port plug from a MP port on
the regulator using an appropriately sized
wrench.
3. Check to ensure the o-ring is present and
in good condition. Screw the threaded end
of the hose into the port and tighten to 40
in-lbs. (4.5 Nm) with a 9/16” crowfoot and
torque wrench.
WArNiNg: DO NOT connect the inflator hose to a high pressure
(hp) port (greater than 200 psi / 14 bar). this may cause the hose
to burst when pressurized, which can result in serious injury. if
you are unsure which regulator port is medium pressure (Mp)
or high pressure (hp), consult your regulator owner’s manual or
your dealer before attaching the hose.