4.2 Filterinstallation
- Open the packaging on the adapter side of the filter
- Leave the filter in its packaging and insert it
(outlet aligned pointing down) into the quick-release coupling
until the filter audibly engages
- Remove packaging
- Open water supply, check the tightness of installation
as well as water flow
4.3 Filter replacement documentation
- Note the date of next filter replacement on the sticker and
place it on the filter in an easily visible position –
but
not
on the barcode.
5 Removal of used filter / filter change
Please disinfect your hands and wear disposable gloves
during filter installation
- Place zip lock bag over the filter, loosen adapter by gently
sliding back the plastic sheath and pull off the filter
- Place the filter into the provided transport box
- Equip transport box with protective foil for safe transport
- Close transport box with cable ties
- Install a new filter (see point 4)
When using the
A-adapter chrome:
- Place zip lock bag over the filter, loosen the adapter as follows:
Insert the tool (small screwdriver, Allen wrench or similar) on
an incline into the small hole on the underside of the adapter.
Press the tool forward and the filter will be disconnected
and can be removed
- Place the filter into the provided transport box
- Equip transport box with protective foil for safe transport
- Close transport box with cable ties
4 Preparation of commissioning and use of product
Please disinfect your hands and wear disposable gloves
duringfilter installation
4.1 Installation of quick-release adapter
- Install suitable quick-release adapter for wall-mounted
or free-standing faucet
- Check tightness of the installation
3 Labelling
2 Certificates / Declaration of conformity
The company Aqua
free
GmbH is certified according to DIN EN ISO 13485.
The Germlyser
®
filters are -labelled medical devices.
Extract from the declaration of conformity
Aqua free GmbH, Winsbergring 31
, DE-22525 Hamburg:
The manufacturer declares for the product Germlyser
®
A to Annex IX of the directive 93/42 EWG on
medical devices and medical products of Class I the conformity with the basic requirements of Annex I
of the council directive 97/42 EEC of the European communities.
1.4 Reprocessing
The Germlyser
®
A is a high-quality, reusable -labelled medical device that is made available to the
customer at a fixed rental rate. Reprocessing is carried out exclusively by Aqua
free
.
Manufacturer label
D/GB
Product information material
SN
Individual product label
Medical device label
Non-sterile
Do not use if package
is damaged
NON
STERILE
1.3 Scope of delivery
• Germlyser
®
A
• Transport box
• Cable tie for product return and box fastener
• Zip lock bag for used filter
• Information material, sticker for filter replacement
