AQUA FORTE SC980, Руководство пользователя

Страница: 48 / 122

17
NO. Action Operation way
8 Adjusting Timing
Press the " " key and hold for 3 seconds to enter the timing setting:
The clock will be flash when the “T iming on 1” is on the display.
With the " " and " " keys you can adjust the hours.
Press the " " key to go to the minutes.
With the " " and " " keys you can adjust the minutes.
Press the " " key to change to “Timing off 1“ on the display.
With the " " and " " keys you can adjust the hours.
Press the " " key to go to the minutes.
With the " " and " " keys you can adjust the minutes.
Press the " " key to go to the next “Timing on 2” to install more
timers.
Press on the "
" key to Exit the timing.
On the display is showed the number of schedulled time periods.
Cancel timing setting:
When the set power-on time and power-off time are the same, the
timing setting of the current time period is canceled.
9 Forced Defrosting Press the "
" and " " keys to enter the forced defrost mode.
When entering the defrost, showing flashes " ".
10
Celsius/Fahrenheit
switch
When the heat pump is off, press the " " and " " keys for 3
seconds. Then on the display the Celsius go to Fahrenheit and visa
versa.
Table 1
Code Meaning Display range
A01 Water inlet temperature - 30~99
℃
A02 Water outlet temperature - 30~99
℃
A03 Ambient temperature - 30~99
℃
A04 Exhaust temperature 0~125
℃
A05 Air inlet temperature - 30~99
℃
A06 Outer coil temperature - 30~99
℃
A07 Inner coil temperature - 30~99
℃
A08 Main EEV opening
A09 EEV opening (EVI)
A10
Compressor current
A11 IPM temperature
A12 DC bus voltage value
A13
Actual speed of compressor
A14 DC fan speed