background image

24

Aqua Creek Products, LLC Limited Warranty:

Pro Pool-AT

TM

Lift “DEEP DRAFT”

Aqua Creek Products lifts have a

Limited Lifetime Warranty

on the frames, not including the powder coat finish.

Aqua Creek Products, LLC (a.k.a. Aqua Creek) also warrants to the original end user that all non-frame components
manufactured by Aqua Creek, when properly installed in accordance with assembly and installation instructions, and
properly used and maintained, shall be free from defects in material and workmanship for a period of five (5) years
from the date of original purchase, provided that Aqua Creek receives prompt notice in writing of any defect or
failure and satisfactory proof thereof, with the following exceptions:

Exception : All electrical components, including the linear actuator shall have the following warranty period:

Year 1-2: 100% Coverage
Year 3: 60% Coverage (Customer is responsible for 40% of replacement cost)
Year 4: 50% Coverage (Customer is responsible for 50% of replacement cost)
Year 5: 40% Coverage (Customer is responsible for 60% of replacement cost)
This warranty specifically excludes reimbursement for labor to remove, repair, or install the product and any return
freight charges.
These warranties do not cover any damages due to accident, misuse, abuse, negligence or failure to properly
maintain any products, or normal wear and tear from day to day operations. In the event that any products are
altered, repaired, or improperly installed or improperly used by anyone without the prior written approval by Aqua
Creek, all warranties are void. IMPORTANT: AMOUNT OF WEIGHT PLACED ON LIFT SHALL NOT
EXCEED THE RATED LIFTING CAPACITY OF 400 POUNDS [181 kg] FOR THE PRO POOL-AT LIFT
“DEEP DRAFT”. NEVER OPERATE THE PRO POOL-AT LIFT UNDER LOAD IN A DRY POOL (WITH NO
WATER IN THE POOL).

To initiate a warranty claim, the owner of an Aqua Creek product must provide the place of purchase, in writing,
with a full description of the product, its serial number, the dates of purchase and installation, and the exact nature of
the defect. Within thirty (30) days after receipt of a written warranty claim by Aqua Creek, and barring any
unforeseen delays, the place of purchase will be notified of Aqua Creek’s decision regarding the claim.

If requested by Aqua Creek, any defective product must be returned, freight prepaid, to Aqua Creek’s designated
factory location or duly appointed distributor for inspection and/or repair. Aqua Creek will, at its option, repair or
replace the failed or defective item, and deliver the repaired product or replacement to the buyer of the product,
freight prepaid to the destination provided for in the original order. Products returned to Aqua Creek for which Aqua
Creek provides replacement under this limited warranty shall become the property of Aqua Creek.

A new warranty period shall NOT be established for the repaired or replaced products. Such products shall remain
under warranty only for the remainder of the original warranty period on the original products purchased.

This written limited warranty constitutes the final, complete and exclusive statement of warranty terms. No person
or organization is authorized to make any other specific or implied warranties or representations on behalf of Aqua
Creek.

THE WARRANTIES SET FORTH HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, WHICH ARE
HEREBY DISCLAIMED AND EXCLUDED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR USE.

THE SOLE AND EXCLUSIVE REMEDIES FOR BREACH OF ANY AND ALL WARRANTIES WITH RESPECT TO THE PRODUCTS
SHALL BE LIMITED TO REPAIR OR REPLACEMENT AT AQUA CREEK’S DESIGNATED FACTORY LOCATION, OR DULY
APPOINTED DISTRIBUTOR, OR IN PLACE AT AQUA CREEK’S OPTION. IN NO EVENT SHALL AQUA CREEK’S LIABILITY
EXCEED THE ENTIRE AMOUNT PAID TO AQUA CREEK BY THE ORIGINAL PURCHASER FOR THE FAILED OR DEFECTIVE
PRODUCT.

IN NO EVENT SHALL AQUA CREEK PRODUCTS, LLC BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL,
INDIRECT, PUNITIVE OR EXEMPLARY DAMAGES OR LOST PROFITS FROM ANY BREACH OF THIS LIMITED WARRANTY OR
OTHERWISE.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY
FROM STATE TO STATE.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,
SO SOME OF THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

Aqua Creek Products

9889 Garrymore Lane

Missoula, MT 59808

Содержание PRO POOL-AT F-004PLB-DD12-AT1

























Отзывы: