6
24V BATTERY SYSTEM OPERATING AND
INSTALLATION INSTRUCTIONS
The Pro Pool Lift
TM
Battery system comes with a 24v sealed rechargeable battery, wall
mount charging unit (with mounting bracket), control box, and a waterproof handheld
controller. The control box is mounted to the Pro Pool Lift
TM
and
has a plug-in socket for
both the actuator and the handheld controller. The battery mounts directly above the
control box with a quick-release clip.
To operate the Pro Pool Lift
TM
, plug in the handheld controller to the control box and
push the corresponding button to either lower or raise the unit. The lift should be able to
complete approximately 10-20 full cycles before the low battery indicator tone will
sound. The low battery tone indicates that there is approximately 20% battery life
remaining. At this point, DO NOT ATTEMPT TO OPERATE THE LIFT, remove the
battery from the unit and recharge on the wall mounted charging unit.
To recharge the battery, simply grip the top of the battery and depress the clip on the back
of the battery. This will unclip the battery from the control box bracket and the battery
can then be clipped into the wall mount charger. When the
charger
is plugged in the
green
ON
light will illuminate. When the
battery
is correctly mounted to the charger, the
orange
CHARGE
light will illuminate. When the battery is fully charged, the
CHARGE
light will
GO OFF
and the battery is ready for use.
WHEN THE BATTERY IS NOT BEING USED IT SHOULD BE STORED ON
THE CHARGER AND NEVER ON THE LIFT. DO NOT LEAVE THE BATTERY
ON THE LIFT WHEN THE LIFT IS NOT IN USE.
CONTROL BOX
& HANDSET REMOTE
WALL MOUNT CHARGER
24 V SEALED BATTERY