V.1
Copyright © 2014 Aqua Creek Products All Rights Reserved
Revised 9/8/14
V.1
Proper Care of Pool & Spa Lifts
PROCEDURE
DAILY
WEEKLY
MONTHLY
Wash down lift with fresh water and dry with clean, soft,
non-abrasive cloth
Recharge battery
Run the lift through a complete test cycle to verify it is
functioning properly
Visually inspect lift for damage, corrosion, and loose or
missing hardware
Check all contact points for damage and/or corrosion
Repair, clean, and apply dielectric grease to all contact
points
Thoroughly clean lift frame and apply a liberal coat of car
wax to maintain the lift’s finish
Check all warning and cautionary labels to make sure they
are not faded or worn. Replace as needed.
PROPER CARE NOTES
• Use only fresh water to wash your lift. Do not wash with pool water
• Use only clean, soft, non-abrasive cloths to wipe down your lift
• Do not store lift in pump room or near chemicals
• Do not allow children to play on or around this lift
• When cleaning the lift do not spray water directly on electronic components
• The lift may need to be bonded according to local code requirements
For service and/or replacement parts contact Aqua Creek Direct at
Toll free: (888) 687-3552
To remove stains, wash affected area with mild dish soap. For stubborn spots and stains
try using Soft Scrub
TM
with some brisk rubbing. Use white epoxy paint to touch up. Apply
wax to finish.
STAIN REMOVAL TIPS:
11
