7
INSTALLING THE FIXING BOLT:
When the FIXING-BOLT is utilized to ensure proper placement of the portable lift the
following procedure should be used when placing the unit in position on the deck.
STEP 1:
Roll the portable cart over the installed anchor. Look straight down through the
DOCKING BAR to align the anchor with the DOCKING BAR.
STEP 2:
Drop the 1/2” x 4-1/2” DOCKING BOLT into the DOCKING BAR and start to
thread the bolt into the anchor by hand. Adjust the alignment until the bolt threads in a
couple of threads by hand. This is to ensure that the bolt is properly aligned before
threading with a wrench.
STEP 3:
Tighten the DOCKING BOLT with a ¾” wrench or socket. Tighten until the
bolt is just touching the flat washer.
DO NOT OVERTIGHTEN.