background image

Copyright © 2017 Aqua Creek Products All Rights Reserved

Revised 9/15/17

Beach Access

Chair

Check entire box and all packing materials for parts. Before beginning assembly, read the instruc-

tions and identify parts using the figures and parts listed in this document.

It is critical that all parts be carefully inspected prior to installation. If any damage occurred in 

transit, Aqua Creek Products, LLC must be notified within three days of receipt of unit. 

Proper installation cannot be overstressed, as an improper installation voids Aqua Creek’s war

-

ranty and may affect the safety of the user.

READ CAREFULLY

PART #: F-6001

300 LB. [136 kg] MAXIMUM WEIGHT CAPACITY

MANDATORY 

 

LEAVE THIS MANUAL WITH CHAIR OWNER

Read and follow all instructions.

Safety can only be ensured if the beach chair is installed 

and operated according to these instructions. 

• 

NEVER permit children to play on or around the chair

•  DO NOT allow children to use the chair without adult 

supervision

•  DO NOT use beach chair without checking tires for 

proper inflation pressure.  Chair may be unstable or 

unsafe is the tire pressure is too high or too low

•  NEVER operate the beach chair in water.  This product 

is not a floatation device

9889 Garrymore Ln

Missoula, MT 59808

888-687-3552 | +1-406-549-0769

www.aquacreek.com

1

Содержание F-6001












Отзывы: