2
BELLY PLATE
VELCRO STRIPS
FRAME
BOTTOM
SECTION
FRAME
MIDDLE
SECTION
ASSEMBLY
INSTRUCTIONS
The Aqua Blaster belly plate unit is shipped assembled. The
water flow components and adjustable locking clamp are
ready to use. The Aqua Blaster height adjustment range is 4”.
STEP 1.
Attach radiused vertical
Velcro pieces to belly plate.
Then attach upper and lower
horizontal Velcro strips.
STEP 3.
Attach frame middle section
(with angle towards user) to
frame bottom section using
two ¼” – 20 x 1” carriage
bolts and two ¼” - 20
serrated flange lock nut.
STEP 2.
Attach frame bottom
section and nozzle rotation
stop bracket to belly plate
assembly using two 5/16”
– 18 x 1” carriage bolts
and two 5/16” - 18 serrated
flange lock nuts. Slide on
stop bracket rubber covers.
NOZZLE ROTATION
STOP BRACKET
BELLY
PLATE
ASSEMBLY
FRAME
BOTTOM
SECTION
