•
Once the installation is complete, go to Control Panel,
Hardware and Sound, printers and devices. Click with the right
mouse button on the printer icon created POS-80C, select
Printer Properties, go to the Ports tab and manually select the
appropriate USB port. Finally click the OK button.
Printing via port directly
For direct printing requires printer control commands. Command
ESC / POS are integrated internally.
Note:
If your computer is connected to serial port, after
installing the driver you need to change the COM port in the
printer properties and set the COM port to printer to obtain the
same bits per second as the default printer comes to 19200.
For LAN interface printer refer to user manual you will find in
intallation CD.
Safety and maintenance instructions
1. Attention: Never open the device, the internal parts have a
shock hazard.
2. Do not use this unit near water, for example, in a wet basement,
in an unprotected outdoor installation or in any area classified as
a wet.
3. Do not introduce objects of any kind into this unit through
openings as they may touch voltage points and short out parts
that could result in fire or electric shock. Do not spill any liquid on
the unit.
4. Always use approved cables and recommended by the
manufacturer for charging the device.
5. Never connect the power adapter to a higher voltage than
recommended.
6. Keep the product at room temperature, maximum 30ºC.
7. If you are not using the product for a period of time, turn it off.
