aqprox! appLS17I2D, Руководство пользователя

Страница: 18 / 50

18
scanned bar code is automatically stored in the scanner memory. If the
internal memory is full, the scanner will emit 3 low-frequency short tones
to alarm, at the same time, the green light flashes 3 times.
Enter inventory mode
Check the number of barcodes stored in the warehouse by scanning the
“Show Total Storage Items” barcode.
Show count total entries
Upload warehousing data by scanning the “Data Upload” barcode. After
the data is uploaded, the barcode stored in the scanner will not be de-
leted automatically. The user uploads the warehouse data multiple times
by scanning the “data upload”.
Upload the data
Note: When uploading data, please try to ensure that the wireless signal
is well connected.
Upload the data through data line.
By scanning the “Clear Warehousing Data” barcode to clear the barcode
data in the storage area, the barcode will not be uploaded after it is clea-
red. Please confirm whether the data has been uploaded before clearing.
Clear count data