aqprox! appLS08, Руководство пользователя

Страница: 7 / 22

Installation and removal of cable protection parts
Installation and removal of cable
Poke into the small hole to
release the cable
LED indicators and beeper
Status Response
Power on LED on(always),Two short beep.
Power down LED go out.
State of operation and standby Only Red LED on(always) -- For 1D mode,
default
setting.
Green LED on also(always) -- For 2D mode.
Good read Red/Green LED flashes one time.
One short beep.
Scan Setting Codes Successfully setup, buzzer sounds twice.
Left Key Switch for 1D Mode and 2D Mode, 3 short
beep when press for switching.
Right Key Each click of this button will change the
sound of a beep.
7